Specifications Sheet
| General Properties | |
| Thickener NLGI Grade Color Texture Penetration: mm/10 worked at 25?C, ASTM D-217 Dropping Point: °C, ASTM D-2265 Base Oil Viscosity: cSt, ASTM D-445 @ 40°C |
Calcium
sulphonate 1 tan smooth 310-340(325 typ) 318+ 95 10.8 |
| Extreme Pressure/Wear Performance | |
| Timken
OK Load: kg, ASTM D-2509 4 Ball Extreme Pressure: ASTM D-2596:load wear index, kg weld pint,kg 4 Ball Wear: scar diameter (mm), ASTM D-4290 |
27.5 62.5 500 0.49 |
| Leakage/Separation Characteristics | |
| Separation: mass %, ASTM D-1742 Oil Separation:FTM 321, cone bleed at 100 C, 24hours, % Whell Bearing Leakage: grams, ASTM D-4290 |
0.1 4.92 6.0 |
| Stability | |
| Roll
Stability: % change after 2 hours at 25 C, ASTM D-1831 at 25 C plus 50% water at 77 C at 77 C plus 50% water Worked Stability: ASTM D-217, % change after 100,000 stokes Water Washout: % at 79 C |
1.9 -3.1 0.9 -2.5 2.7 3.5 |
| Corrosion Resistance | |
| Rust
Test Rating: ASTM D-1743 Salt Fog Rust Protection: hours, ASTM B-117, 1 mil d.f.t. Copper Strip Corrosion: ASTM D-4048 |
pass >300 1b |
| Oxidation Resistance | |
| Bearing
Life: hours, ASTM D-3527. Bomb Oxidation: psi drop after 500 hours, ASTM D-942 |
220 5.5 |
| Low Temperature Properties | |
| Torque: ASTM D-1478 -29?C, gram.cm, start/run | 2500/1500 |
| For
Technical Assistance, contact Georgia Western, Inc. or
UTILITY SERVICE ASSOCIATES58 Garnock Avenue, Toronto, Canada M4K 1M2 Phone: 416 466-3144 or 888 442-5008 Fax: 416 466-3807 |
|
|